William Ellsworth Bugard Jr
William Ellsworth Bugard Jr
Obituary
Guest Book
William Bugard Obituary
A farmer and electrician by trade, he developed a wide range of mechanical, electrical, and practical skills over the years and was described as a jack of all trades. He took pride in understanding how things worked and was always willing to share that knowledge with others.
He especially loved tractors, and orange Allis-Chalmers models were his favorite. He collected and restored them, using them for daily tasks like baling hay, plowing snow, and mowing the lawn. He also brought many of his tractors to shows, where he enjoyed sharing his passion with others.
Bill and Dorotha enjoyed traveling together, often by motorhome, eventually visiting every state in the United States. He also traveled to Ireland and Scotland, trips that were especially meaningful to him. Wherever he went, Bill took care to document life's moments, enjoying photography, recording family memories with his camcorder, and keeping track of details large and small.
Throughout his life, Bill served as a mentor to many, sharing not only his mechanical and electrical knowledge but also practical lessons learned through experience. Above all, he valued his family and friends deeply. Bill believed that acquaintances became friends, and friends became family, and he lived that belief every day.
Bill will be missed by his loving wife, Dorotha Bugard; his children, Michael Bugard and Michelle Barker; his sister, JoAnn Windsor; his sister-in-law, Nancy Yarsevich; his grandchildren, Brooke Bergstrom and Benjamin Bergstrom; and his great-grandchildren, Evelynn Bergstrom and Cooper Bergstrom. He will also be missed by the many people whose lives he touched and who became part of his extended family. He was preceded in death by his parents, William Sr. and Ruth Bugard; his sister, Irene Haller; his brother-in-law, William Windsor; and his granddaughter, Lexus Bergstrom.
His Farewell… William's family and friends will gather on Friday, January 30th, 2026, from 4 PM - 7 PM at Borek Jennings Funeral Homes, Fowlerville, Michigan. A gathering will precede the Community Farewell on Saturday, January 31st, 2026, beginning at 10:00 AM at Borek Jennings Funeral Homes in Fowlerville, Michigan. The Community Farewell will follow at 11:00 AM at the same location. Chaplin Adam Doyle will serve as the celebrant. Memorial contributions are suggested to Hospice House of Shiawassee. Please leave a message of comfort for William's family at 1-877-231-7900, or sign his guestbook at www.borekjennings.com.
To send flowers to the family, please visit our floral store.
To plant trees in memory, please visit the Sympathy Store.
1 Entry
Brett Weed
January 29, 2026
Memories of Bill Bugard
1/29/2026
I first met Bill in September 1981 working for Master Cast Company in my senior year of high school. I started working as a draftsman part time after school. At first I was manually drawing the plant to scale and making paper cutouts we called "dolls" of the plant equipment to better organize it. Later started working on tooling, fixturing, machinery drawings, hydraulic drawings, Relay Logic electrical drawings and became curious how simple relays could be connected together to control industrial machinery. As I was making these new drawings from illegible ones I enlisted the help of Bill. He would explain in great detail the magic of how they worked in the field. This was the start of a great friendship. As time permitted during breaks and in between breakdowns Bill taught me how Aluminum and Zinc Die Casting machines worked.
The following year I enrolled in classes at Lansing Community College and continued working part time at Master Cast. I starting taking classes in electronics. I would reciprocate things learned with Bill throughout College while earning degrees in Electronics Communications and Digital Electronics. Bill was all ears. He would also try to relate what I was learning back to the real world applications in the plant. This mutual learning experience was the start of a great relationship and the start of my industrial electronics background.
Later on Bill introduced me to the first Allen Bradly SLIC 100 & SLIC 150´s PLC´s (Programmable Logic Controllers) new to the market. This was my first exposer to them. Bill would hand sketch the wiring diagrams and hand sketch the programmable relay logic code. I would draft them up into official machine prints.
We started teaming up building industrial machinery. We combined scrap machine parts with some new purchase part and some custom designed parts to build custom industrial machinery.
About the same time as I was completing college and started looking for a full time job I received word the company was being bought out by a Japanese company. It was recommended to stick around and see what happens. I was offered a starting position as a Manufacturing Engineer / Process Engineer with the company newly named Alpha Technology Corp. In my new role I was able to expand on the knowledge Bill and I acquired working together designing and building custom machinery. This is what I liked doing and became very good at it, very fast. It combined mechanical drafting, electronics, mechanical design, computers, and hands on machine assembly all together. This was the foundation Bill had helped lay for my entire career. If things got too crazy with the new staff, I knew I could always count on having an intelligent or laugh it off conversation with Bill to bring things back into perspective.
I took the first Jet ride of my life with Bill to Newark New Jersey for Toshiba Plastic Injection Molding Classes. This was obviously before GPS. We could not figure out how to get into the hotel parking lot. After driving by it several times, Bill got us to a building close by and I scaled a chain link fence to ask for directions to get into their parking lot. Bill was still talking about this recently. No desire to ever go back there again. Their roads are crazy.
One time after work I visited "Bills Barn"(s) and surrounding wooded area. This was the first time I had been inside, up close, to a real barn and it made a lifelong impression on me, sparking architectural ideas for future buildings.
One of the last machines we built together was a semi-automatic deburr machine for the anti-pick sidebar on a GM Ignition Lock project. Previously the plant had 2-3 people working 2-3 shifts to manually deburr these parts. For the price of a custom trim die, some air cylinders and a few electrical parts I designed and Bill and I built a semi-automatic machine that did the same volume with one operator on 1 or 2 shifts. After not receiving proper recognition for this project with its substantial cost savings and durability I determined it was time to look for another career opportunity.
With the foundation I receive working with Bill I ended up working on some of the largest Die Cast and Injection Molding Machines in the United States. I quickly became the lead Electrical Engineer with 5 draftsman working under me designing a multimillion dollar experimental Co-injection Molding Machines for UBE Heavy Machinery being utilized at Ford Motor Company.
In 1997 I left behind personal car parts in Bills barn and headed to Oregon/Washington. I ended up working as an Engineering in the Die Cast/ Foundry industry for over 35 years.
Coming full circle now I am forever grateful to Bill for laying the foundation of my wonderful career and financial success. When the opportunities arise I now try to pay it forward and mentor the younger generation like Bill did with me.
When returning to Michigan for family events I try find time to see what Bill is up to. I was really impressed by his personal tractor museum. We just saw him in November 2025 after Thanksgiving and in the cold barn he started his vintage Allis-Chalmers 1950´s model tractor faster than most people´s cars start. I reported this back to Oregon and Washington.
Bill was a great and wonderful man!! I am honored and privileged to spend so much quality time with Bill doing what we both loved. We will miss you buddy!
Brett Weed
Oregon/Washington, formally of Howell, MI
How you can show support
Follow
Get email updates whenever changes are made.
Send flowers
Consider sending flowers.
Add photos
Share their life with photo memories.
Plant trees
Honor them by planting trees in their memory.
Donate in Memory
Make a donation in memory of your loved one.
Share this page
Invite other friends and family to visit the page.
Showing 1 - 1 of 1 results
1005 East Grand River Ave, Fowlerville, MI 48836
Make a Donation
in William Bugard's name
People and places connected with William
Recent Obituaries
Recent Obituaries
How to support William's loved ones
Should I Send Sympathy Flowers?
What kind of arrangement is appropriate, where should you send it, and when should you send an alternative?
Read more
What Should I Write in a Sympathy Card?
We'll help you find the right words to comfort your family member or loved one during this difficult time.
Read more
Resources to help you cope with loss
How to Cope With Grief
Information and advice to help you cope with the death of someone important to you.
Read more
Estate Settlement Guide
If you’re in charge of handling the affairs for a recently deceased loved one, this guide offers a helpful checklist.
Read more
Obituaries, grief & privacy: Legacy’s news editor on NPR podcast
Legacy's Linnea Crowther discusses how families talk about causes of death in the obituaries they write.
Read moreWays to honor William Bugard's life and legacy
Obituary Examples
You may find these well-written obituary examples helpful as you write about your own family.
Read more
Obituary Templates – Customizable Examples and Samples
These free blank templates make writing an obituary faster and easier.
Read more
How Do I Write a Eulogy?
Some basic help and starters when you have to write a tribute to someone you love.
Read more
